How to Do a Ghost Immobiliser Install
The ghost immobiliser is an advanced anti-theft device. It operates silently, without radio frequencies and makes use of the CAN data network to protect your vehicle from being stolen.
Before embarking on an installation of a ghost immobiliser it is vital to grasp the workings of the device. A thorough understanding allows you to navigate the installation process seamlessly and leverage its capabilities optimally after installation.
Identifying the Wires
A ghost immobiliser, which is a modern security system designed to guard your car from theft. It uses sophisticated technology to stop your car from starting when you enter a particular pin sequence. The device can be placed inside your vehicle in a discreet manner and could help lower your insurance premiums. It's perfect for those who own expensive or high-performance automobiles and want to guard their pride from theft.
The system is connected to the engine controller through CAN. This makes it more difficult for thieves to disable the immobiliser or remove it. It also does not send out radio frequencies and operates silently. The immobiliser is secure and does not require LED indicators or key fobs to operate. It can be used to stop your vehicle from being stolen, even if your keys have been cloned.
It's important to be prepared for the possibility that you'll have to take out the ghost immobiliser in the future. You'll need familiarise yourself first with the wiring system of your vehicle. Wear safety gloves and ensure that you're working in an area with good ventilation. Disconnect the wires from your immobiliser with wire cutters or strippers. Label each wire so that you can identify the connection if you need to.
You must be aware that getting rid of the Ghost Immobiliser isn't for the faint of heart. It requires a lot of patience and concentration on the details. If you're willing to spend the time it could be an extremely effective method of vehicle protection. You can hire a certified professional to install a ghost immobiliser on behalf of you, and they can offer regular software updates to address security vulnerabilities and improve the performance of the system.
Disconnecting the Battery
The ghost immobiliser can be a great way to prevent the theft of your vehicle however, if properly installed, it will drain the battery. The device has to be connected to the vehicle's electrical system which requires working with wires and potentially bypassing some factory components. This is why it's important to have a professional technician install the device and follow all manufacturer's instructions. You could cause damage to your vehicle that will require expensive repairs or even the replacement of your battery.
A TASSA certified installer will use only the best equipment, including scanners that are able to check the wiring of your vehicle to ensure that it is in good shape. They will also be aware of the specific requirements for your car model. They'll be able to identify the vehicle's wiring and work on it without damaging the original system. They will also be able install the Ghost immobiliser in a discreet manner so that it doesn't impede the aesthetics of your vehicle's exterior or interior.
The process of installing isn't easy, so it is crucial to take your time. It is also advisable to work in well-lit areas, wear appropriate safety gear and read the instructions before starting the work. Ghost 2 immobiliser will help you avoid making mistakes and ensure the safety of yourself and those around you while working with electrical tools and components.
After disconnecting the batteries, you will have to locate a permanent power source and a grounding. It is recommended to mark these locations with labels or tape to make it easier to connect and disconnect them later. It is also an excellent idea to use a multimeter test the power supply and ensure that it provides consistent 12V output.
Making Connections
A ghost immobiliser install requires lots of time and focus on detail. It involves working with delicate electrical components and a lot of wires, so it is crucial to take your time. Wear safety equipment such as protective gloves and eyewear. Work in a place with adequate lighting.
After you have carefully examined the wiring in your vehicle and identified the CAN H/CAN L wires, it's time to connect them. You should use high-quality connectors to ensure strong and reliable connection. It is also essential to ensure that the connections are properly insulated to shield against damage and avoid accidental disconnections.
The Ghost immobiliser is a highly effective tool that can help prevent car theft by making it extremely difficult for thieves to get started and drive the vehicle. It stops the engine from being started until a PIN code has been entered, a beacon is present or a command has been sent through the WeCar mobile application. Ghost 2 immobiliser allows you to remotely disable or lock the system remotely. It is perfect for people who switch between vehicles often or who utilize their vehicle to perform service work.
The Ghost immobiliser is different from traditional immobilisers that depend on keys or codes to shut down the engine. It uses complex algorithms that are nearly impossible to hack. Installed in a hidden location, thieves may not be aware of its presence. It is also possible to use it in conjunction with the GPS function that sends you notifications when your vehicle leaves the parking space it was assigned and allows you to follow and locate it. You will also receive phone alerts when someone attempts to break into your vehicle.
Insulating the Connections
Ghost Immobilisers are the newest in vehicle security technologies. They are directly connected to the CAN data system in your car and block the engine from starting until the PIN code is entered. This sophisticated device is discreet and doesn't require the use of key fobs or other traditional security systems which makes it a preferred option for drivers who want to secure their vehicles from theft.
It is crucial to follow the installation guidelines to ensure precision. Make sure you check the locations of the CAN H and CAN L wires before proceeding with the installation in order to avoid misunderstanding the wires, which could cause the system to fail. It is also recommended to label these wires or use tape to mark them during the installation process as it can be easy to lose the wires within the wiring loom. It's also vital to identify the source of power that has continuous 12V power and test it with a multimeter to make sure that the Ghost Immobiliser will receive consistent power.
The wires must be protected to avoid any electrical damage. It's as simple as wrapping the exposed wire in insulation or soldering it to make a reliable connector. It's important to use a top-quality soldering tool and properly cover your work area to avoid any mistakes.
The Ghost Immobiliser can be linked with a compatible tracking or alarm system to provide an enhanced level of security for your vehicle. This can aid in theft prevention and recovery, as the tracking system or alarm will notify the police if it detects any attempts to interfere with or start the vehicle.
Connecting the Battery
Utilizing electrical tape to seal and join any cut wires and resoldering solder at any connections is a great method to ensure that no exposed wires could cause an accidental short circuit. After re-inserting your battery, you must check the immobiliser and the ignition system to ensure all components are functioning correctly.
If you encounter any issues during the ghost immobiliser installation it is best to speak with a professional. They can help you identify the problem and determine the best solution.
The Ghost Immobiliser is a great way to safeguard your vehicle from theft, since it will prevent unauthorised engine starts and keep thieves off their tracks. The device is also undetectable to thieves who use codes or diagnostics, because it doesn't make use of any radio frequencies.
In terms of power consumption, a Ghost Immobiliser shouldn't take a lot of battery power from your vehicle. It draws only a small amount (around 8mA) of power, so it shouldn't have any impact on the performance or function of your vehicle. However, if the device isn't installed correctly or encounters issues, it may draw more than it needs to and drain the battery.
It is important to take the time to properly complete a ghost immobiliser install will greatly reduce your chances of experiencing issues later on. It is recommended that you read the manual for your particular device and look up online resources for more information. This will provide you with the necessary tools and information to perform a professional installation. The added security and peace of mind Ghost Immobiliser gives is worth the price.